Standard Bench Height And Depth

Although this is the average range the height of a bench is dependent on its use.

Standard bench height and depth. The ada sets a standard bench seat height of 17 19 inches 43 48cm above the floor. A standard fridge measures around 1700mm h x 720mm w a sink unit of standard size measures around 600mm to 800mm benchtops are generally 900mm from the ground dishwasher cavities normally measure around 860mm h x 605mm w. Standard dimensions for stock or diy base floor cabinets are 720mm high by 560mm deep without the door. Which side of my bench should the vise go on.

In most cases that number falls around 24. The american with disabilities act recommends seat heights of 17 to 19 inches for the maximum amount of functionality making the bench comfortable for people with limited mobility. What is the standard bench depth. The standard bench depth is between 15 and 20.

Most benches fall in the 14 to 17 inch range. Wayfair explains that most benches average 17 5 inches deep. But for most projects and pieces two feet should be sufficient. Benches can have a depth anywhere from 15 20 inches 38 51 cm although the typical bench used for dining is considered to be around 17 inches 44 cm.

The standard floor cabinet height is 720mm 1 4mm. Standard depth might run anywhere from 16 20 but again depends on the size of your shower and how much surface you want available on your bench. Keep in mind that you need to be able to sit comfortably on the bench without it digging into the backs of your knees. Floor cabinet depth ideally should not exceed 600mm handles excluded.

For this reason depths beyond 20 inches can be uncomfortable to sit on without a back. Depending on what height is comfortable for you choose from heights between 14 and 19 inches above the ground. Note that bench height refers to the distance from the seat to the ground. How deep are benches.

The standard bench height is 18 20. A dining room bench tends to fall around 17 5 deep. If you happen to be the type of woodworker that works with unusually large or wide pieces then you may want to add a few inches. Depth the depth of your workbench should ideally be no longer than your arm can reach across it.

This height is suitable for a bench at a dining room table. Decide if you want to be able to keep shampoo accessories etc. Standard dining table height the standard dining room table height is around 28 30 inches 71 76cm from the ground to table top surface. The height of a bench is typically between 18 and 20 inches 46 51 cm.

The standard height of 34 matches most tablesaw heights allowing the workbench to double as an outfeed support. Bench seats tend to sit somewhere around 16 inches high. The standard floor cabinet depth is 580mm inclusive of door thickness.